YK5180C CNC gear shaping machine

Writer： admin Time：2024-06-13 13:35:02 Browse：52℃

The main steps for adjusting the cutting mechanism of the gear hobbing machine include:

Check whether the positioning end face runout of parts related to machining, such as tool holders, tool bosses, mandrels, 

and fixtures, meets the machining requirements, and whether the fit clearance of the workpiece is reasonable.

Adjust the angle of intersection between the tool holder and the tool shaft, and adjust the ± lambda angle in place according

 to the needs of the processed product (subtract in the same direction, add in the opposite direction).

Calculate and correctly install the gear change gear, differential change gear, and cutting tool change gear.

Check whether the rolling cutter and workpiece are tightly locked, and whether the rolling cutter is in a safe position.

Manual radial feed, when the rolling cutter contacts the outer diameter of the workpiece, the position is the starting

 point of the effective feed position, and on this basis, the initial feed trial cutting is carried out.

Fix the position of the travel stop (travel switch) on the tool holder for cyclic machining.

Pay attention to the operation of the machine and conduct timely inspection of the product, and correct any problems found in a timely manner.

These steps ensure the correct adjustment of the cutting mechanism of the gear shaping machine, thereby ensuring the accuracy and efficiency of the machining.