How to operate the gear hobbing machine

Writer： admin Time：2024-08-02 09:26:08 Browse：58℃

Machine preparation: Place the CNC gear hobbing machine on a flat surface and connect the power and air sources to ensure that the machine is in normal working condition.

Setting parameters: Based on the requirements of the workpiece and the settings of the CNC program, set the machining parameters of the CNC gear hobbing machine,

 including tool selection, feed rate, cutting depth, etc.

Operation steps

Power on preheating: Press the start switch of the CNC gear hobbing machine to perform system self-test and initialization, and preheat the gear hobbing tool to the set temperature.

Clamping workpiece: Fix the gear workpiece to be machined on the worktable of the CNC gear hobbing machine and perform clamping operation.

Edit program: According to actual needs, edit the gear hobbing program through the CNC system and upload the program to the CNC gear hobbing machine.

Start machining: Press the machining start button to start the automatic machining operation of the CNC gear hobbing machine. During the processing, 

attention should be paid to observing the processing status to prevent abnormal situations from occurring.

End processing: After processing is completed, manually move the worktable back to the origin and turn off the CNC gear hobbing machine.

In addition, safety precautions should be taken during the operation, such as wearing protective equipment and avoiding collisions between the rolling cutter and the workpiece,

 to ensure the safety and effectiveness of the operation process. ‌