Operating procedures for gear hobbing machine

Writer： admin Time：2024-08-12 11:36:58 Browse：55℃

1、 Preparation before operation

Ensure that the gear hobbing machine is powered on normally, has a good working environment, and is free from debris interference.

Clean the work area and ensure that there are no debris around the gear hobbing machine.

Check whether the gears, cutting tools and other accessories are intact, and replace them in a timely manner if they are damaged.

Wear personal protective equipment, including safety shoes, helmets, protective gloves, etc.

2、 Operation steps

Start the gear hobbing machine and ensure that the main switch is in the off state.

Place the workpiece to be processed on the workbench and secure it in place.

Adjust the height of the workbench to ensure that the distance between the workpiece and the tool is appropriate.

Turn on the main switch, power switch, and start the motor.

Adjust the position of the gear hobbing machine tool to ensure close contact with the workpiece.

Adjust the feed handle and control the feed speed of the tool, not too fast or too slow.

Monitor the cutting status to ensure good machining results.

Regularly inspect the wear and tear of gears, cutting tools, and other accessories, and replace them in a timely manner.

After completing the processing, turn off the power switch and stop the motor from running.