CNC gear hobbing machine panel usage tutorial

Writer： admin Time：2024-10-12 13:35:55 Browse：49℃

1、 Basic operations

1. Power on and start up

The power switch is located in the upper right corner of the front panel of the gear hobbing machine. After turning on the power, press the "Start" button on the panel to start the device.

2. Selection of working mode

The gear hobbing machine supports two working modes: single mode and continuous mode. In single mode, the device pauses after inserting the tooth profile once;

 In continuous mode, the device can automatically cycle through the tooth profile until manually stopped.

3. Parameter settings

Before starting the device, users need to specify the machining parameters of the gear hobbing machine, such as tooth pitch, number of teeth, 

cutting speed, depth, etc., through the parameter setting function on the CNC gear hobbing machine panel.

4. Manual operation

When manual adjustment of the gear hobbing machine is required, users can use the "manual" mode to adjust the axial and height of the equipment by pressing the "left", "right", "up", and "down" buttons on the lower panel.

5. Automatic operation

When the gear hobbing machine is running in automatic mode, the equipment will automatically insert the tooth profile, and after the tooth profile is generated,

 the machine will automatically exit the tool, and the next tool will automatically rise and fall to the welding wire head of the equipment.

2、 Interface elements

1. Main interface

The main interface of the CNC gear hobbing machine displays the working status and processing progress of the gear hobbing machine, including mode selection, speed, real-time position, work progress, and alarm information.

2. Parameter setting interface

In the parameter setting interface, users can set hobbing parameters such as tooth pitch, number of teeth, cutting speed, tool diameter, depth, and aperture to meet the machining requirements of different workpieces.

3. Manual operation interface

The manual operation interface includes operation buttons such as "left", "right", "up", "down", etc. Users can use these buttons to manually adjust parameters such as device axis and height.

3、 Precautions

Before using the gear hobbing machine, users need to read the equipment manual and understand the relevant safety technical measures.

During the equipment processing, do not apply excessive pressure, otherwise it may cause equipment damage or uneven processing.

When using a CNC gear hobbing machine, users should pay attention to safety and avoid placing their hands or other parts near the cutting area of the equipment.

4. When the gear hobbing machine is working, it is recommended to clean up the debris and chips around the equipment in a timely manner to maintain cleanliness and keep the equipment in normal working condition.

5. Regularly maintain and upkeep the equipment to ensure the normal service life of the CNC gear hobbing machine.

The above is a detailed introduction to the manual for using the CNC gear hobbing machine panel, hoping to be helpful to users. 

When using a CNC gear hobbing machine, be sure to pay attention to safety and follow the operating requirements in the equipment manual to ensure the normal use of the equipment.