The reason for the slow up and down movement of the gear hobbing machine

Writer： admin Time：2024-11-12 09:25:55 Browse：15℃

1、 Air pressure issue

The up and down movement of the gear hobbing machine needs to be achieved through air pressure. If the air supply is insufficient or the air path is blocked, the up and down movement will be slow.

 The solution is to check if the air pressure source supply is normal, clean the air path to prevent blockage.

2、 Circuit malfunction

The up and down movement of the gear hobbing machine also requires circuit support, such as insufficient power supply voltage, solenoid valve failure, etc.,

 which can cause slow up and down movement. The solution is to check if the power supply voltage is normal, repair the solenoid valve or replace the circuit board.

3、 Mechanical resistance

Gear hobbing machines may accumulate dust and oil stains during use, causing resistance in mechanical components and resulting in slow up and down movements. 

The solution is to regularly clean and lubricate the mechanical components to maintain good operating condition of the machine.

4、 Hydraulic system abnormality

Some models of gear hobbing machines use hydraulic systems to complete up and down movements. If the hydraulic system fails or the oil is contaminated,

 it can cause slow up and down movements. The solution is to check whether the hydraulic system is normal, replace the contaminated oil, and inspect the hydraulic components.

Summary:

The slow up and down movement of the gear hobbing machine may be caused by factors such as air pressure problems, circuit faults, mechanical resistance, hydraulic system abnormalities, etc. 

In the production process, if slow up and down movement of the gear hobbing machine is found, the fault should be promptly investigated and corresponding measures should be taken to repair it to ensure production efficiency.