How to disassemble and assemble the main shaft of the gear hobbing machine

Writer： admin Time：2024-02-01 14:27:28 Browse：28℃

The disassembly and assembly of the main shaft of the gear hobbing machine can be divided into the following steps:

Preparation before disassembly:

Confirm that the machine is turned off and unplug the power plug.

Prepare the necessary tools and protective equipment, such as gloves, goggles, wrenches, pliers, napkins, etc.

Check if there are any attachments around the spindle, and if so, clean it thoroughly.

Dismantling the spindle:

Use a wrench or pliers to remove the screws and clamps on the spindle.

Use a wrench to loosen the spindle at both ends.

Gently tap the spindle with a wooden stick to gradually remove it from the machine. Be gentle and avoid damaging the spindle or other parts of the machine.

Install the spindle:

Match the spindle with the sleeve and gently place it inside the machine.

Fix the spindle and adjust its axis and torsion to meet technical requirements.

Install fasteners and clamps at both ends of the spindle.

The above steps can help you complete the disassembly and assembly of the gear hobbing machine spindle. Please note that the specific operation may vary depending on the model and working environment. Therefore, in actual operation, please refer to the specific equipment manual or seek professional guidance.