How to adjust the gap between the cutters of the gear shaping machine

Writer： admin Time：2024-04-28 13:37:47 Browse：181℃

To adjust the tool clearance of the gear hobbing machine, the following steps need to be followed:

Align the machine, tighten the screws, and reinstall the locating pins.

Scrape both end faces to ensure their perpendicularity is within 0.01 range.

Adjust the tool mechanism to achieve a reset accuracy of less than 0.01.

After completing these steps, the clearance between the cutters of the gear hobbing machine should be adjusted appropriately.