Adjustment Method for Asymmetric Tooth Direction of CNC Gear Shaper

Writer： admin Time：2024-06-05 14:41:21 Browse：80℃

Adjustment Method for Asymmetric Tooth Direction of CNC Gear Shaper

1. Adjust the fixture

Firstly, it is necessary to check whether the rigidity of the CNC gear hobbing machine fixture is correct. If the fixture is incorrect, it needs to be readjusted. Correctly adjusting the fixture can ensure that the cutting position and force of the gear are the same, thus effectively solving the problem of tooth asymmetry.

2. Correction of cutting error

In order to solve the problem of tooth asymmetry caused by the adjustment error of CNC gear shaping machine, it is necessary to correct the adjustment amount. Usually, it is necessary to adjust the various parameters of the CNC gear hobbing machine to achieve the best effect. It should be noted that,

The cutting error should be corrected in a timely manner, otherwise it will affect the accuracy and service life of the gear.

3. Replace the cutting tools

If the cutting tools of the CNC gear hobbing machine wear out, they need to be replaced in a timely manner. At the same time, it is also necessary to ensure that the difference in tools before and after each tool change is not too significant. Replacing the appropriate tool can ensure even cutting force and position, thereby solving the problem of tooth asymmetry.

In short, asymmetric tooth orientation of CNC gear hobbing machines can have an impact on the accuracy and lifespan of gears, which needs to be addressed in a timely manner. Adjusting fixtures, correcting cutting errors, and replacing tools are all effective methods to solve tooth asymmetry.