Maintenance regulations for CNC gear hobbing machine

Writer： admin Time：2024-08-30 14:36:17 Browse：66℃

Maintenance Regulations

Daily maintenance: After finishing work each day, operators should clean the CNC gear hobbing machine to remove impurities such as cutting oil residue and iron filings on the machine surface, 

and lubricate components such as guide rails and sliders.

Regular lubrication: According to the frequency of use and working time of the CNC gear hobbing machine, regularly inspect and maintain

 the lubrication system of the equipment to ensure the quality and adequacy of the lubricating oil.

Regular inspection of mechanical mechanism: Regularly inspect the mechanical structure of the CNC gear hobbing machine, tighten loose screws, and replace damaged or worn parts in a timely manner.

Maintain the normal operation of the electrical system: Pay close attention to the electrical system of the CNC gear hobbing machine, regularly check the connections and protective measures of components such as wires,

 cables, switches, etc., to ensure the normal operation of the electrical system.

Check the wear of cutting tools: Regularly check the degree of wear of cutting tools according to their usage, and replace or repair them in a timely manner to ensure the effectiveness and quality of gear hobbing.

Do not immediately turn off the power when shutting down: Before shutting down, it should be cooled down first. Do not immediately turn off the power to avoid damaging the equipment due to sudden power outages.

When the CNC gear is not in use for a long time, it should be turned on regularly for no-load operation to maintain the flexibility and normal working condition of the equipment.

By following the safety operation and maintenance procedures of the CNC gear hobbing machine mentioned above, the normal operation of the equipment,

 the personal safety of the operators, and the service life of the equipment can be ensured. During the use of the equipment by the operator

Strictly implement the above regulations and make adjustments and improvements according to the actual situation in the actual operation process to ensure the improvement of work efficiency and quality