Common faults and troubleshooting methods of gear hobbing machine

Writer： admin Time：2024-08-31 10:02:22 Browse：70℃

Gear hobbing machines may encounter various faults during use, mainly including electrical problems, machine problems, and lubrication system problems. 

The following are some common faults and their solutions:

Electrical issues

Power issue: The sudden shutdown of the gear hobbing machine during operation may be caused by abnormal power supply. The solution is to check if the power supply circuit is normal.

Motor problem: If the gear hobbing machine makes abnormal sounds or suddenly stops, it may be a problem with the motor. The solution is to check and replace the motor components.

Electric control part problem: If the gear hobbing machine cannot start or stop automatically, it may be a problem with the electric control part. 

The solution is to check whether the electric control circuit is normal and replace the electric control components.

Mechanical issues

Belt issue: If the gear hobbing machine experiences tearing or deviation, it may be a problem with the belt. The solution is to check if the belt is worn and replace it with a suitable one.

Bearing issue: If the gear hobbing machine makes abnormal sounds, it may be a problem with the bearings. The solution is to check whether the bearings are worn or loose, and adjust or replace them.

Tool problem: If the cutting effect of the gear hobbing machine is poor or there is tool jamming, it may be a problem with the tool. The solution is to check whether the tool is worn or damaged, and replace or repair it.

Other issues

1. Lubrication issue: If there is poor lubrication in the gear hobbing machine, it may be a problem with the lubrication system. The solution is to check if the lubricating oil is sufficient or replace the lubrication device.

2. Equipment issues: If the machine frequently starts or stops, it may be due to equipment problems. The solution is to check if the equipment is functioning properly or replace the relevant devices.

Through the above methods, common faults encountered during the use of gear hobbing machines can be effectively solved, ensuring the normal operation of the equipment and extending its service life.