Detailed explanation of input steps for machining parameters of CNC gear hobbing machine

Writer： admin Time：2024-12-04 11:24:06 Browse：175℃

As an important equipment in modern mechanical processing, the input method of machining parameters for CNC gear hobbing machine is crucial. Correct parameter settings 

can ensure machining accuracy and efficiency, reducing unnecessary waste and losses.

The following will provide a detailed introduction to the input steps of machining parameters for CNC gear hobbing machines.

1、 Select processing parameters

Before starting processing, it is necessary to select appropriate processing parameters based on the material, size, and processing requirements of the workpiece. 

These parameters include but are not limited to cutting speed, feed rate, cutting depth, etc.

The selection of cutting speed should take into account the hardness of the material and the wear resistance of the tool, 

while the feed rate should be determined based on the accuracy requirements of the workpiece and the performance of the machine tool.

2、 Set processing parameters

1. Open the control system of the CNC gear hobbing machine and enter the parameter setting interface.

2. Based on the previously selected processing parameters, make corresponding settings in the control system. This usually includes specific values such as input cutting speed, feed rate, cutting depth, etc.

3. After confirming that the parameter settings are correct, save and exit the settings interface

3、 Adjust processing parameters

In the actual processing, it may be necessary to adjust the processing parameters according to the actual situation. 

For example, if the cutting force is found to be too large or too small, the cutting depth and feed rate can be adjusted appropriately.

When adjusting parameters, the operating procedures and safety standards of the machine tool should be followed to ensure the safety and stability of the machining process.

4、 Verify processing parameters

After setting and adjusting the processing parameters, it is necessary to conduct trial cutting to verify the rationality and accuracy of the parameters.

 During trial cutting, attention should be paid to observing whether the cutting process is smooth and whether the cutting quality meets the requirements. 

If there are any issues, it is necessary to adjust the parameters in a timely manner.

Summary: The input of machining parameters for CNC gear hobbing machines is a complex and meticulous process that requires operators to have rich experience and professional knowledge.

 By selecting and adjusting processing parameters reasonably, the smooth progress of the processing process can be ensured,

Improve the machining quality and efficiency of workpieces. I hope the introduction in this article can be helpful for everyone in practical operation.