How to adjust the gear hobbing machine with large variable momentum

Writer： admin Time：2024-03-15 13:08:29 Browse：47℃

If there is a problem of large variation in the machining process of the gear shaping machine, adjustments can be made through the following methods:

Adjust the clearance between the cutting wheels. The cutting wheel and module gear operate together to form grooves and cut off the material of the workpiece. If the gap is too large, the gap can be reduced by adjusting the tension screw on the cutting wheel, and after adjustment, fix the adjusting screw on the cutting wheel. one

Replace the appropriate module. The quality and degree of wear of the module will affect the processing quality. Remove the original module, install a suitable new module, and adjust its position and pressure.

Adjust the pressure. The magnitude of pressure will affect the quality of the processed workpiece, and the appropriate pressure can be achieved by adjusting the pressure adjustment screw.

Adjust direction and angle. The direction and angle of the turntable will affect the effect of gear insertion, and the direction and angle of the turntable can be adjusted according to actual needs. two

Adjust spacing. Adjust the distance between adjacent teeth on the turntable, being careful not to be too small or too large.

Replace the cutting tools. If the tool is excessively worn, replace it with a new tool. three

Control processing temperature and pressure. Ensure that the temperature and pressure during the processing are within a controllable range.

Timely maintenance of equipment. Thoroughly clean and inspect the equipment, and replace aging components in a timely manner.

Use automation control technology. For machining tasks with higher precision requirements, use a CNC system to control the machining process.

When making these adjustments, it is important to pay attention to safety by first stopping the machine and unplugging the power plug, and using appropriate tools for measurement and adjustment.